7 Tips On How to Clear a Clogged Sink In Toronto 

A clogged sink in Toronto is a common problem that almost everyone will have to deal with at some point in their lives. If you’ve ever had a clogged sink, then you know how frustrating it can be. Water backs up in the sink, making it impossible to use. Fortunately, there are a number of ways to clear a clogged sink. In this article, we will show you the 7 tips that you can follow to get your sink back up and running in no time.
  1. Boil water:
Boiling water is one of the easiest ways to clear a clogged sink. It’s also one of the most effective methods, and it doesn’t cost anything other than your time. All you need to do is boil some water in a pot on the stovetop and pour it down into your clogged drain. The boiling water will cause any grease or food particles that are stuck in your pipes to soften up, allowing them to be flushed out easily.
  1. Remove the drain cover:
Once your drain has been cleared, proceed with removing its cover so that you can get down inside of it and check for any other obstructions that may be causing problems with drainage flow. Most bathroom sinks have removable covers which can be easily unscrewed with a wrench or screwdriver (depending on whether or not they use screws or clips). You may need to use pliers if there are any stuck parts inside your drain cover.
  1. Use a wet/dry vacuum:
If your sink is clogged with hair, you may be able to fix the problem by simply using a wet/dry vacuum. This tool is ideal for removing lint, hair, and other small particles from drains. The best way to use this tool is to attach it to the end of a hose and turn on the water in your sink. As soon as there’s enough water coming out of the drain, turn off the valve and stick the hose into it. Then turn on the vacuum and watch as all of that debris flows right into your trash can!
  1. Pour in a liquid drain cleaner:
Liquid drain cleaners are designed to break down clogs in your sink or tub. They come in several different varieties, but they all work the same way. You pour the liquid down the drain, wait for it to work its magic, and then flush away any remaining residue with hot water (or an additional dose of the product).
  1. Use a plumber’s snake:
A plumber’s snake is a small device that consists of a long wire coil with a handle on the end of it. You can use this tool to remove blockages in your pipes by pushing them down through the drain opening and then pulling them back up again. This will help dislodge any debris that has accumulated in your pipes.
  1. Use a chemical clog remover:
If you have tried everything else and still have not been able to clear your clog, then you should consider using a chemical clog remover. These products usually come in either liquid or powder form and they contain powerful chemicals that dissolve grease, hair and other matter that might be clogging up your pipe.
  1. Use an auger:
An auger is a long metal tool with a spiral tip that is used to remove objects from drains. If your drain has been slow for months or even years, this may be the best option for you. While an auger can be difficult and time-consuming to use at first, it does not require any chemicals or other tools — only some muscle power!


You can find a number of ways to clear a clogged sink in Toronto. It is easy to fix a clogged sink if you follow these instructions. But if clogging is hard to fix, then ask for help from a professional plumber.
Back To Top